By now you surely know that I love making minis, right?
So when Lisa Bongean collaborated with Creative Grids to come up with these rulers specifically for making mini quilts I was thrilled!
Honestly, after finally completing the flimsy for my mini version of
Lisa's APQ SAL Burgoyne Surrounded quilt, I was about ready to throw my OmniGrid rulers out the window. I had become so frustrated, trying to cut very precise little pieces with thick lines that were solid in too many places. To top it off, no matter what I apply to the back of my rulers, they slide at the most inconvenient times. And if you put anything on the back that adds any height you are shooting yourself in the foot as far as accurate cutting is concerned.
I had already decided that I was going to be replacing my OmniGrid rulers with Creative Grids when I read Lisa's post
here. I couldn't wait to get my hands on the rulers and planned to order them after the next payday. But Lisa beat me to the punch and had a set sent to me so that I could try them and share my experience and opinions. Let me say up front, I am delighted!
Look at the markings--everything is marked clearly, down to every eighth of an inch.
The lines are narrow and dashed all the way along. So easy to line up on the edge of the fabric or a seam line to get a precise cut.
I finally got play time and have experimented with some of Lisa's own patterns for small quilts.
Making 1 1/2 inch HSTs and pinwheels, I made a very small version of the Primitive Gatherings pattern "Pinwheel Garden". Excuse the fact that I made my pinwheels rather hurriedly (no pinning), so the centers don't match well, but the photos show how clearly you can see to line up your cuts. Lisa recommends foundation piecing for this quilt, but I used the "make large, cut smaller" technique to give the rulers a good test.
They passed the test so well that I have actually cut HSTs to make the whole quilt in scrappy CW blues and browns.
I decided to give the "Broken Dishes" pattern a try, but this time I thought I'd take it up a notch (or would it be down?) by making the units half the size the pattern indicates. Instead of finishing at 2", those little Broken Dishes blocks finish at 1".
I got everything cut and then began sewing together the broken dishes blocks.
The ruler markings made squaring up these little blocks so easy. I did not "cut large" on these blocks, but had no trouble coming out with perfect little blocks. You can see I was practically just trimming off fuzz when I squared them.
After completing enough broken dishes for three rows, I decided to stitch those rows together and move on to another test of the rulers.
Here are the finished three rows up against one of the Itty-Bitty Eight Rulers. I think it is fun to see how much mini quilts shrink when sewn together.
Next I wanted to test how well things would come together when using one of the less common measurements. I pulled out some thrift store shirt scraps and decided to pretend that the scraps were only 7/8", so I would need to make my cuts accordingly.
I got lazy about taking photos during this process. Above you see the cut squares compared to my rotary cutter. Below you see the basket in my hand. It will finish at 1 3/4". The 7/8" markings were not hard to work with at all.
I did try one other project, but took no photos of the process. When I made
my mini Burgoyne Surrounded, the most maddening thing in the whole process was the little 9-patch blocks that finish at 3/4". I was having such a hard time getting good results with the OmniGrid rulers, so I had to try a few tiny 9-patch blocks with these rulers. You can see the little double 9-patch block at the bottom of this photo.
It isn't laying flat so it looks wonky, but I was really pleased with
how well the 9-patches turned out. That block will finish at 2 1/4".
This photo shows all of my "test projects" together, with the rulers. I haven't had much sewing time lately, so this has taken longer than I care to admit. But I can't wait to finish up the broken dishes, and tackle my CW blue & brown version of the pinwheel quilt.
I can highly recommend the Itty-Bitty Eights to anyone who makes minis, or even those of you who make larger quilts that have many smaller parts in the construction. The 6" square is probably the one I used the most, but when I was making the 9-patch blocks by sewing strips, the 3"x7" was very handy. My only wish was that the 3"x7" would have had more markings across the width of the ruler, as the square does. Other than that, no complaints. The textured dots and edges held onto the fabric well. It wasn't until I was writing this post that I realized I hadn't had any slipping problems with any of these projects. Many thanks to Lisa and Creative Grids for a job well done!
Next week is the 4th anniversary of my blog. I'll have to celebrate somehow. : )
Until then,
Janet O.
So much red/white/blue in my sewing room lately. Even my leader/enders pinwheels have been pretty much in that color scheme (with a little black thrown in for depth).
